Contact Us Video why choose us
Home > Exhibition > Content

Product Categories

Wire rope clip installation standards
Mar 02, 2018

The number of wire rope clip use

According to GB5976-standard, the number of wire rope clip is generally not less than 3-5, rope spacing should be 6 - 7 times the rope diameter, the number of clips according to the rope diameter.

Wire rope clip should be used together

U-ring part of the rope should be stuck in the side, the platen on the side of the main rope.

Wire rope clip in use should pay attention to the following points:

a) The size of the wire rope clip should be suitable for the thickness of the wire rope. The inner clearance of the U-shaped ring should be 1 ~ 3mm larger than the diameter of the wire rope. If the clearance is too large, the rope will not be easily clamped and will be prone to accidents.

b) When tightening the clamp bolt, tighten the bolt until the rope is squashed 1/3 ~ 1/4 diameter, and after the rope force, tighten the clamp bolt again to ensure the joint is solid and reliable.

c) Wire rope clip to be aligned, U-shaped part of the contact with the rope, not in contact with the main rope, as shown. If the U-shaped portion is in contact with the main rope, the main rope is crushed and easily broken when subjected to force.


d) In order to check the reliability of the joint and find out whether the wire rope slides, add another collet about 500mm behind the last collet and let the rope be released into a "safety bend", as shown in figure (b). In this way, when the joint of the rope slip occurs, the "safety bend" is first straightened, then you should immediately take measures to deal with.

Main Products
3/8 Forged Cargo Weld...
M12 C15 CE Zinc Plate...
M16 C15 Zinc Plated C...
Galvanized JIS1168 Sc...
Galvanized JIS1169 Me...
Tel: +86-532-88293060
Saleman: Ann Zhang
whatsapp: +86-18661631650